If the supply pipes run close to your machine, you can fit T-piece stop valves and screw the hoses to them. These should end in mini stop valves to which your machine’s hoses can be connected. You can then add T-fittings and run branch pipes to the machine. If your machine’s hoses won’t reach your existing supply pipes, you’ll need to turn off your water supply at the mains tap, drain the system and cut the pipes. The connection unit should have a neon light to show when the machine is switched on. Glue 2-inch pipe to the the inlet and run it to the wall behind the washing machine, keeping a minimum downward slope toward the drain of 1/4 inch per foot. A good solution is to run a spur from a socket to a switched fused connection unit above your work surface, and then a cable from this to an unswitched socket below the surface to serve the machine. Washing machines and dishwashers need to be plugged into a standard socket, but a common problem in kitchens and utility rooms is that all the sockets are positioned above the work surfaces.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |